Peak Design Anchor Links

A set of Peak Design Anchor Links was used to connect a Godox PROPAC PB960 Lithium-Ion Flash Power Pack to the strap that shipped with the battery. The power pack fits better in one of the larger pockets on a safari vest without the strap.

I can never remember how to thread photo gear straps safely and securely, so I loosened the strap on one side of the battery to see how it was done.

Parts, before assembly.

The next photo shows one of the Anchor Links connected to the battery, and one of the Anchors connected to the end of the strap.

Anchor Link component parts connected to battery and strap.

The last photo shows the Anchor Link, well, anchored to the Anchor.

Anchor Link component parts connected.

Added flexibility using Anchor Links

The strap for the Godox battery pack can be repurposed as a replacement for the strap on my Panasonic Lumix superzoom bridge camera; the old strap is frayed at the point where it’s connected to the camera and is cause for concern.

Each set of Anchor Links ships with four (4) Anchor Links and two (2) Anchors, so I connected the other two Anchor Links (not shown in the preceding photos) to my Panasonic camera. Now it’s quick and easy to use one strap for two pieces of photo gear!

Copyright © 2018 Walter Sanford. All rights reserved.

Tags: ,

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s


%d bloggers like this: