Skimmertime, and the livin’ is easy.

Skimmers (Family Libellulidae) — like this female Spangled Skimmer dragonfly (Libellula cyanea) — remind me of “Summertime,” a classic song from the opera Porgy and Bess.

One of these mornings you’re gonna rise up singing
And you’ll spread your wings and you’ll take to the sky

This individual was spotted during a photowalk around a small pond with my good friend Mike Powell.

21 MAY 2019 | Northern Virginia | Spangled Skimmer (female)

The last two photos are similar takes on the same pose.

21 MAY 2019 | Northern Virginia | Spangled Skimmer (female)

21 MAY 2019 | Northern Virginia | Spangled Skimmer (female)

Gear talk

All of the photos featured in this blog post are uncropped JPGs, that is, full resolution for the Panasonic Lumix DMC-FZ300 superzoom bridge camera (4,000 x 3,000 pixels), published “as is” straight from the camera. I tweaked the settings for in-camera processing of JPG files and I must say I think the results look good!

It’s worth noting that I always shoot/save/edit RAW photo files. Period, full stop. I have been using JPG (Fine) plus RAW (actually, RW2) while field testing the FZ300.

Deeper dive

I recently expressed disappointment and frustration with the performance of my newer Panasonic Lumix DMC-FZ300 superzoom digital camera versus my older Panasonic Lumix DMC-FZ150. After making the switch to shooting in Manual Mode, I’m pleased to report I think I’ve found a new “set it and forget it” configuration for the FZ300.

In Manual Mode, my “walking around” settings are ISO 100, an aperture of f/4.5, and a shutter speed of 1/800 s. All of the photos in this post were shot at f/4.5.

The camera features three Custom Modes: C1; C2; and C3. C1 uses all of the “walking around” settings, except for changing the aperture to f/5.6; C2 uses an aperture of f/6.3; and C3 uses an aperture of 7.1. With the mode dial set for “C” it’s easy to switch from one custom mode to another by pressing the menu button and selecting one of the three custom settings, depending upon the desired depth of field.

An external flash unit is used in Manual mode;. The power ratio is adjusted for proper exposure, depending upon the aperture: more power is necessary with a smaller aperture (larger f-stop number); less power for a larger aperture (smaller f-stop number).

As I mentioned previously, I tweaked the settings for in-camera processing of JPG files: Photo Style = Standard; Contrast = +2; Sharpness = +2; Noise Reduction = 0; and Saturation = 0.

Noise reduction can be a good thing, but NR can soften image sharpness so it’s an adjustment I prefer to make in post-processing.

Related Resource: DMC-FZ150 versus DMC-FZ300, a blog post by Walter Sanford.

Copyright © 2019 Walter Sanford. All rights reserved.

Advertisements

Tags: , , , , , ,

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s


%d bloggers like this: